DMC G749 Daniels Gage Go .2710 .2790

( Brand: Dmc ), ( Manufacturer Part Number: G749 ), ( Country/region Of Manufacture: United States )

Review DMC Daniels Usa Gage Go .2710 No .2790

The DMC G749 Daniels Gage GO 2710 No-Go 2790 is a precise measuring tool designed for ensuring the dimensional accuracy of various parts during manufacturing processes. This go and no-go gauge set, also known as a pair gauge or limit gage, consists of two gauges: the Go Gauge (G749) and the No-Go Gauge (G749-2790).

The Go Gauge (G749) is the smaller one in the set and is used to check for the minimum acceptable size or dimension. It has a cylindrical body with an overall length of 2.0 inches (50.8 mm) and an outside diameter of 0.750 inches (19.05 mm) at the larger end. This gauge is designed to barely fit through a hole, shaft, or other openings that should be at or slightly smaller than its diameter to ensure proper fitment. The Go Gauge is identified by the red marking and the "GO" print located near the end.

The No-Go Gauge (G749-2790) is larger in size, with an overall length of 2.875 inches (72.97 mm) and an outside diameter of 0.826 inches (21.00 mm) at its larger end. It is used to check for the maximum acceptable size or dimension, as it is too large to fit through openings that should not exceed its size. The No-Go Gauge is identified by the blue marking and the "NO-GO" print near the end.

Both gauges in the DMC G749 Daniels Gage GO 2710 No-Go 2790 set are made from durable materials, ensuring a long service life while providing consistent and reliable measurements. They offer a high degree of precision and are suitable for use in various industries, including automotive, aerospace, and general manufacturing. The spinning-type design allows easy and efficient measurement, and their compact size makes them portable and convenient for use on-the-go. Overall, this go and no-go gauge set provides a quick and accurate method for confirming the dimensional compliance of components, ensuring production efficiency and product quality.

DMC G749 Daniels Gage Go No-Go Gages: A Comprehensive Analysis

The DMC G749 Daniels Gage Go No-Go gages are precision measuring tools used for the inspection of machined surfaces, particularly in the automotive and aerospace industries. These gages come in various sizes and are designed to ensure interchangeability and consistency in manufacturing processes. In this analysis, we will discuss the pros and cons of investing in these gages.

1. Consistent Quality: DMC gages are engineered to meet high-precision standards, ensuring accurate measurements during the inspection process. This leads to quality control, increased productivity, and minimizing the risk of part rejections.

2. Durable and Long-lasting: Constructed using high-quality materials, these gages can withstand the rigors of daily use and harsh environment conditions. Consequently, they have a long lifespan, contributing to cost savings in the long run.

3. Improved Efficiency and Productivity: These gages streamline the inspection process by offering several functionalities in one tool. This results in faster inspection cycles and increased production rates.

4. Versatility: DMC G749 Daniels Gage Go No-Go gages cater to a wide range of applications and industries, providing flexibility in their use and ensuring that various dimensions can be checked accurately.

1. Upfront Cost: The initial investment in these gages can be quite substantial due to their high-precision engineering and materials. This investment might be prohibitive for smaller businesses with limited budgets.

2. Limited Size Range: While the DMC gage line offers a vast selection of gages, it may not provide coverage for all possible no-go dimensions or special applications. This means businesses might need to invest in additional tools for comprehensive inspection processes.

3. Potential Learning Curve: Users need to be trained on the correct use and application of these gages to ensure accurate measurements. Lack of proper training might result in inconsistent measurements and reduced efficiency.

4. Potential Damage: These gages primarily consist of hardened steel, which can cause wear on the surfaces being inspected. This could result in damage to the machined components, increasing maintenance costs and potentially requiring replacement.

The DMC G749 Daniels Gage Go No-Go gages are a valuable investment for businesses requiring high-precision measuring tools for their manufacturing processes. Their durability, efficiency, and consistency yield significant cost savings over time and contribute to an improvement in overall quality. However, the initial investment may be a barrier for some small businesses, and the need for a diverse range of gages for comprehensive inspection might necessitate further investments. Given their advantages, businesses in industries that rely on precise measurements, such as automotive or aerospace, would greatly benefit from the addition of these gages to their toolkit. Based on the analysis, the pros undoubtedly outweigh the cons, making it a worthwhile investment for businesses seeking to enhance their manufacturing processes and quality control.

Businesses looking into investing in DMC G749 Daniels Gage Go No-Go gages should carefully evaluate their specific requirements and the scope of their inspection processes. Factoring in the costs, benefits, and potential limitations mentioned in this analysis should aid in making an informed decision. It is also advisable to provide training to users to ensure proper handling and usage, reducing the likelihood of any potential issues or damage to components.

part # g749 prices

• $9.99-$362.34

specifications inducrimp:

• brand: Dmc
• manufacturer part number: G749
• country/region of manufacture: United States

shipping inducrimp:

• service: USPS Ground Advantage, USPS Priority Mail
• transit: 5-10 Days
• carrier: USPS
• type: Calculated
• class: Standard, Expedited
• cost: $0.00

general inducrimp:

• Light Equipment Tools > Electrical Tools > Hand Crimpers Strippers
• condition: New Open box

returns inducrimp:

• policy: No Returns

seller inducrimp:

• # reviews: 817
• rating: 99.1%

offer inducrimp:

• options: Ship-to-home
• sold: 0
• best offers: True
• availability: In Stock
• started: January 8, 2025
• quantity: 1

payments inducrimp:

• credit card: Discover
• other
• wallet: Paypal

Dmc G749 Is Similar To:

• Daniels Tp567 Single Position Head Dmc (34.9% similar) $87.54–$237.77. (August 23rd, 2024)
• Dmc Dbs-br1 Daniels Extraction Removal And Insertion Tools Band Tool (31% similar) $30.00–$99.00. (August 23rd, 2024)
• Dmc M22520/1-04 M22520101 Crimper - Blue A F 8 By Daniels Mfg. Corp (31.3% similar) $108.00–$369.00. (August 23rd, 2024)
• Daniels Dak32 Mfg Insertion Tool Dmc (31% similar) $28.39–$95.94. (August 24th, 2024)
• Dmc Hc36 Daniels Manufacturing Hd36 Hydraulic Crimp Tool (42.3% similar) $1499.99. (August 25th, 2024)
• Daniels Cw100-4 Connector Wrench Dmc Cw 100-4 (23.7% similar) $39.14–$149.99. (August 25th, 2024)
• Dmc Daniels Mh802 - Avionics Minature Adjustable Crimp Tool (33.6% similar) $119.00–$299.99. (August 29th, 2024)
• Dmc Gmt232 Gmt-232 Professional Daniels Mfg Commercial Crimp Tool - Usa 12 26 Gauge (32.1% similar) $194.00–$469.99. (August 29th, 2024)
• Dmc Scte203b Daniels Manufacturing Powered Safe-t-cable Crimp Tool No Battery (36.8% similar) $1945.00. (September 2nd, 2024)
• Daniels K13-1 Mfg Dmc Positioner Use With Crimp Tools Crimper Cage 11851 (26.7% similar) $49.99–$324.99. (September 4th, 2024)
• Dmc Drk83-16s Daniels Mfg. Removal Tweezer Drk83-16 (36.4% similar) $60.00–$200.00. (September 5th, 2024)